Initial Camera Setup - Ikelite 6171.07 Instruction Manual

Initial Camera Setup

1. Insert a fully charged battery and formatted memory card.
2. Set camera date and time.
3. Set Shooting Mode to "A" Aperture priority. To select faster shutter
speeds use "M" Manual mode.
4. Set Lens Aspect Ratio Selector Switch to "3:2."
5. Set Photo Style to "STD" and Picture Size to "9.5m."
6. Set Picture Quality to "Fine."
7. Set AF Mode to "Center" and AF/AE Lock to "AF/AE."
8. Set Metering Mode to "Center Weighted."
9. Set Stabilizer to "ON" and AF Assist Lamp to "OFF."
10. Set Flash to "Forced Flash On" (lightning bolt
11. Set Red-Eye Removal to "OFF."
12. Set White Balance to "AWB."
13. Set AF/AE LOCK button to AF
14. Set ISO sensitivity to "80."
15. In Economy, set Sleep Mode to "10 MIN" and Auto LCD Off to "30 MIN."
16. Set Auto Review to "2 SEC."
- When NOT using external strobes, raise camera flash BEFORE placing
camera in the housing. Reset ISO to 400.
(before placing camera in housing)
.
).
5