Ikelite 6171.07 Instruction Manual page 23

Problem
Water enters the
housing
Pictures are too blue
or too green
Solution
- Remove, clean and properly lubricate the main
housing o-ring.
- Look for hair, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and submerge in water or take diving.
- Return housing to Ikelite for evaluation.
- Use custom (manual) white balance if available.
Reset for each working depth or when attaching a
color correcting filter.
- Add an optional color correcting filter.
- Add an external strobe.
- Move in closer to your subject when taking a
picture.
23