Burner Heads - Electrolux Gas Cooktop Use And Care Manual

Care an Cleani
Cleaning cooktop, grates, caps and burner heads
Cleaning the grates
The burner grates are dishwasher safe and may be
cleaned in the dishwasher. Remove any excessive
soils before placing in the dishwasher.
Your appliance is shipped with the burner heads
and burner caps in the correct locations. Before
using your gas appliance be sure to:
• Follow installation instructions before operating.
Remove all packing tape from cooktop area.
Caps
Should you ever need to remove the burner caps
for cleaning lift the burner cap off the burner
head. Clean heavy soils with an absorbent cloth.
Rinse with a clean, damp cloth and immediately
thoroughly dry including the bottom and inside
of the cap. Do not use harsh abrasive cleaners.
They can scratch the porcelain on the cap. Do not
clean burner caps in dishwasher. When placing the
burner caps, see Important note below.
Burner heads
Lift the burner cap from the burner head. The
surface burner heads are secured to the cooktop
and must be cleaned in place.
For proper gas flow it may be necessary to clean
the burner heads and slots. To clean, first use a
clean DAMP cloth to soak up any spills. Remove
any food from between the burner slots using a
small nonabrasive brush like a toothbrush and
afterwards wipe using a damp cloth. For stubborn
soils located in the slots, use a small-gauge wire or
needle to clean.
Should you experience ignition problems it may be
that an ignition port hole is partially blocked with
soil (see figure below). With the burner head in
place, use a small wire gauge needle or the end of
a paper clip to clear the ignition port or ports.
Slots Ignition port
i
i
:)rifice port