Liqueﬁ ed Petroleum
(Propane) Gas Conversion
This appliance can be used with Natural Gas and
Propane Gas. It is shipped from the factory for use
with natural gas.
A kit for converting to LP gas is supplied with your
cooktop. The kit is marked "FOR LP/PROPANE
GAS CONVERSION". Follow the installation
instructions which are inside the envelope.
The conversion must be performed by a qualiﬁ ed
service technician in accordance with the kit
instructions and all local codes and requirements.
Failure to follow instructions could result in serious
injury or property damage. The qualiﬁ ed agency
performing this work assumes responsibility for the
For most cooking, start on the highest control
setting and then turn to a lower one to complete
the process. Use the chart below as a guide for
determining proper ﬂ ame size for various types
of cooking. The size and type of utensil used and
the amount of food being cooked will inﬂ uence the
setting needed for cooking.
For deep fat frying, use a thermometer and adjust
the surface control knob accordingly. If the fat is too
cool, the food will absorb the fat and be greasy. If
the fat is too hot, the food will brown so quickly that
the center will be undercooked. Do not attempt to
deep fat fry too much food at once as the food will
neither brown nor cook properly.
Severe shock, or damage to the cooktop may occur if the
cooktop is not installed by a qualiﬁ ed installer or electrician.
Any additions, changes or conversions required in order for this
appliance to satisfactorily meet the application needs must be
made by a qualiﬁ ed service technician in accordance with the
manufacturer's instructions and all codes and requirements of
the authority having jurisdiction. Failure to follow the instructions
could result in serious injury or property damage. The qualiﬁ ed
agency performing this work assumes responsibility for the
Type of Cooking
Start most foods; bring water
to a boil; pan broiling
Maintain a slow boil; thicken
sauces, gravies; steam
Keep foods cooking; poach;
*These settings are based on using medium-
weight aluminum pans with lids. Settings may
vary when using other types of pans.
Never extend the ﬂ ame beyond the outer edge of
the utensil. A higher ﬂ ame simply wastes heat and
energy, and increases your risk of being burned by
the ﬂ ame.
Proper Burner Adjustments
The color of the ﬂ ame is the key to proper burner
adjustment. A good ﬂ ame is clear, blue and hardly
visible in a well-lighted room. Each cone of ﬂ ame
should be steady and sharply deﬁ ned. Adjust or clean
burner if ﬂ ame is yellow-orange. To clean burner, see
instructions under General Care & Cleaning.