Restart Wireless
Reset Unit
Figure 3.5
Code Update Screen
Type the file location or select the "Browse" button to find the location of the
file that contains the code update. Select your file and press "OK."
Select "Install Code" to initiate the file transfer and update the code, or select
the "Cancel" button to cancel the update.
Select the "Restart Wireless" button to restart the PCMCIA wireless network
card. This immediately disconnects any existing wireless link, clears the card
services statistics, and restarts the wireless card acquisition process.
Select the "Reset Unit" button to display the screen shown in Figure 3.6.
Figure 3.6
Reset Confirmation Screen
C o n f i g u r a t i o n
3-9