Administration-Level Status And Configuration Display - Verilink NetPath 2000 Reference Manual

Link-Recovery
Sys-Uptime
NAT
SNMP-Mgt
Interface
IP-address
Net-Mask
DHCP-Serving
RX-OK
RX-ERR
RX-DRP
RX-OVR
TX-OK
TX-ERR
TX-DRP
TX-OVR

Administration-Level Status and Configuration Display

Displays the number of times the PCMCIA card has lost connection and the
NetPath 2000 has had to reestablish connection to the wireless network.
Displays the time since reboot or power cycle. This is router operational time,
not wireless connection time.
NOTICE:
Sys-Uptime indicates router operational time, not wireless connection
time.
Indicates whether NAT is enabled on the Branch Router interface.
Values: ON, OFF
Indicates whether the NetPath 2000 can be configured and monitored from the
wireless network.
Values: ON, OFF
Lists the NetPath 2000 interfaces.
Values: Local-Mgt, Router, VPN, Wireless
Displays the IP address of each interface.
Displays the net mask address of each interface.
Displays the current DHCP setting for the two Ethernet interfaces.
Values: ON, OFF, N/A
Displays the number of receive packets without errors.
Displays the number of receive packets with errors.
Displays the number of receive packets missing.
Displays the number of receive overruns.
Displays the number of transmit packets without errors.
Displays the number of transmit packets with errors.
Displays the number of transmit packets missing.
Displays the number of transmit overruns.
Configuration control is permitted only at the administration-access level. The
default administration password is "admin." This password is case sensitive.
C o n f i g u r a t i o n 3-3