Connecting To An External Router For Wireless Backup Operation - Verilink NetPath 2000 Reference Manual

Connecting to an External Router for Wireless Backup
Operation
255.255.255.0, and comes DHCP enabled. Either enable DHCP under your
PC's network settings, or configure your PC to an appropriate IP address such
as 192.168.100.2, subnet mask 255.255.255.0. For further information on
configuring your NetPath 2000, refer to Chapter 3, Configuration,.
For wireless backup, connect a straight-through CAT5 cable from the branch
router Ethernet interface to the branch office router.
I n s t a l l a t i o n 2-3