Enterasys X-Pedition XSR-1850 Getting Started Manual page 35

6. Position the NIM atop the open slot (NIM 2) pin holding assembly on the chassis and gently
press into place. Fasten the back end of the NIM/brace to the chassis with the screws
supplied, as shown in
7. Reattach the bottom access cover to the chassis.
8. Attach the rack brackets to the chassis with the screws supplied, as shown in
Figure 2-4.
Figure 2-4 Installing NIM Card
Installing NIM Cards and Rack Mounting
Figure
XSR Getting Started Guide 2-5
2-5.