Applying Grease - When The Grease Indicator Illuminates (Semi Dry Type) - Brother T-8420C Instruction Manual

8. CLEANING

8- 3. Applying grease - When the GREASE indicator illuminates (Semi dry type)

If the GREASE indicator (1) illuminates and the buzzer sounds each time the treadle is depressed, it means that it is time to
apply grease to the sewing machine. Apply grease while referring to the following page.
<Rear>
<To continue sewing temporarily without applying grease>
1. Press the RESET switch (2) for approximately one second.
(The buzzer will stop sounding but the GREASE indicator (1) will remain illuminated even when the treadle is depressed.)
* Use an object with a sharp point to firmly push in the RESET switch (2) as far as it will go.
2. Sewing can continue in this condition, but if the cumulative sewing machine operating time reaches a further 10 hours, the
buzzer will start sounding again. If this happens, apply grease and then reset the alarm display by referring to the
procedure on the following page.
* If you continue to use the sewing machine after carrying out the reset procedure but without applying grease,
problems with the sewing machine may result.
Note based on California law (USA) on the use and handling of Perchlorate
This product contains a CR Coin Lithium Battery which contains
Perchlorate Material – special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
31
T-8420C, 8450C, 8720C, 8750C
Buzzer
2994M
2995M