Add Engine Oil - Honda CMX250C REBEL 2007 Owner's Manual

Engine Oil
5. Pour the drained oil into a suitable
container and dispose of it in an
approved manner (page
Improper disposal of drained f luids is
harmf ul to the environment.
6. Check the condition of the sealing
washer on the engine oil drain bolt.
Replace the washer every other time the
oil is changed.
Install the engine oil drain bolt and
tighten it to the specified torque:
18 lbf·ft (25 N·m , 2.5 kgf·m)
80
Servicing Your Honda
137 ).

Add Engine Oil:

7. Fill the crankcase with the
recommended oil (page
approximately:
1.6 US qt (1.5 )
8. Install the oil filler cap/dipstick securely.
9. Start the engine and let it idle for 3 5
minutes.
10. Stop the engine and wait 2 3 minutes.
11. Hold the motorcycle upright and check
that the oil level is at the upper level
mark on the oil filler cap/dipstick (page
77
).
12. Check that there are no oil leaks.
If a torque wrench is not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
74 ),