Honda CMX250C REBEL 2007 Owner's Manual page 158

5. Remove the front axle shaft ( ), wheel,
and side collar.
RIGHT FRONT
(4)
(3) axle pinch bolt
Avoid getting grease, oil, or dirt on the
disc or pad surfaces. Any contamination
can cause poor brake performance or
rapid pad wear after reassembly.
4
(3)
(4) front axle shaft
If You Have a Flat Tire
Avoid depressing the brake lever when
the wheel is off the motorcycle. This
will force the caliper pistons out of the
cylinders. The result will be loss of
brake fluid. If this occurs, the brake
system will require service. See your
Honda dealer for this service.
Taking Care of the Unexpected
149