Hardware Installation; Assemble The Mounting Bracket; Pole Mounting - D-Link DAP-3860 User Manual

Hardware Installation

Assemble the Mounting Bracket

1. Place the main bracket into the seating and use a spanner to fasten the bracket to the DAP-3860
with M5×16 screws ⑧ and M5 washers ⑨ provided in the hardware packets;
2. Assemble the main bracket by placing articulation pole ② to the T-form bracket ① via a M8×90
④ screw through the insertion axe and fix with the M8 washer ⑤ , spring washer ⑥ and M8 nut
⑦;

Pole Mounting

1. Install the main bracket and the pole mount bar ③ over the top of the pole by securing the drill
holes of the pole mount bar to the main bracket ones and insert two M8×80 ④ screws, spring
washers ⑥ and washers ⑤ through the drill holes and main bracket;
Chapter 2 Hardware Installation
Figure 4 Bracket Mounting – Step 1
Figure 5 Bracket Mounting – Step 2
17