Table of Contents
Advertisement
Configuration File
It is strongly recommended to back up configuration information in case of something unexpected. If
tragedy hits your device, you may have an access to restore the important files by the backup. All these
can be done by the local or remote computer.
Open "Configuration File" in "Administrator Settings" as below:
Download Configuration File
By clicking "Download" a dialog box will popup. Save it, then the configuration file is saved to your
local computer.
Upload Configuration File
By clicking "Browse" a file selection menu will appear, select the file you want to load, like Dlink.cfg;
Click "Upload" to load the file. After automatically rebooting, new settings are applied.
Restore Factory Default Settings
The DAP-3860 provides two ways to restore the factory default settings:
Restore factory default settings via Web
From "Configuration File", clicking "Restore" will eliminate all current settings and reboot your device,
then default settings are applied.
Chapter 5 Management
Figure 43 Configuration File
53
Advertisement
Table of Contents
