Bind Ip To Mac - Draytek Vigor2960 series User Manual

4 . 2 . 4 B i n d I P t o
4 . 2 . 4 B i n d I P t o
This function is used to bind the IP and MAC address in LAN to have a strengthen control in
network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
This page allows you to configure related settings for the function of Bind IP to MAC.
Each item will be explained as follows:
Item
Mode
Select All
Move
ARP Table
IP Address
MAC Address
Add
Vigor2960 Series User's Guide
M A C
M A C
Description
Enable - Choose it to invoke this function. However,
IP/MAC which is not listed in IP Bind List also can connect
to Internet.
Disable - Choose it to disable this function. All the settings
on this page will be invalid.
Strict Bind – Choose it to lock the connection of the
IP/MAC which is not listed in IP Bind List.
Allow you to choose all the items listed in ARP Table.
Move the selected item to IP Bind List.
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can be
selected and added to IP Bind List by clicking Move on IP
Bind List
Display the IP address of one device.
Display the MAC address of the device.
It allows you to add one pair of IP/MAC address and display
on the table of IP Bind List.
.
85