Draytek Vigor2960 series User Manual page 203

4. After filling the required information for Basic, click the Advanced tab to open the
following page.
Available parameters are listed as follows:
Item
Aggressive Mode
Local Peer ID
Remote Peer ID
Phase 1 Key Life
Time
Phase 2 Key Life
Time
Perfect Forward
Secrecy Status
Dead Peer
Detection Status
DPD Delay
Vigor2960 Series User's Guide
Description
Enable – Click it to enable Aggressive Mode.
Disable – Click it to disable Aggressive Mode.
Type the ID for Vigor2960 which can be configured by the
remote end. It is available for Aggressive Mode enabled
only.
Peer ID is on behalf of the IP address while identity
authenticating with remote VPN server. The length of the ID
is limited to 47 characters. It is available for Aggressive
Mode enabled only.
The rekey-renegotiated period of the IKE Phase1 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
The rekey-renegotiated period of the IKE Phase 2 keying
channel of a connection. The acceptable range is from 5 to
480 minutes (8 hours).
Enable the PFS function. A new Diffie-Hellman Key
Exchange is included every time an encryption and/or
authentication key are computed on PFS.
Enable or disable the DPD function.
The keep-alive timer. A Hello message will be emitted
195