Tuner Set; Manual Channel Set; Auto Channel Set - JVC DR-MV5S Instructions Manual

INITIAL SETTINGS
22
EN

Tuner Set

Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
0 – 9
ENTER
INFORMATION
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be displayed on
the right side of "BAND" on the Tuner Set screen.

Auto Channel Set

Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "INITIAL SET UP", then press t.
3
Press w e to select "TUNER
SET", then press t.
4
Press rt w e to select
"AUTO CH SET", then press
ENTER. You can automatically
set the receivable channels in
your area in the order of their
frequencies.
When Auto Channel Set is
complete, "SCAN COMPLETED"
appears on the TV screen.
If the scan was unsuccessful,
"SCAN COMPLETED–NO SIGNAL–" appears on screen. Check the
connections and start again.
5
Press SET UP to complete the setting.
rtwe
SET UP
DVD SET UP FUNCTION SET UP INITIAL SET UP
TUNER SET CLOCK SET
BAND CATV
AUTO CH SET
MANUAL CH SET
GUIDE CH SET
SET UP OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
DVD SET UP FUNCTION SET UP INITIAL SET UP
TUNER SET CLOCK SET
BAND CATV
AUTO CHANNEL SET
AUTO CH SET
SCANNING...
MANUAL CH SET
CANCEL
GUIDE CH SET
SET UP
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT

Manual Channel Set

You can add the channels you want or delete the channels you do
not want manually.
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "INITIAL SET UP", then press t.
3
Press w e to select "TUNER SET", then press t.
4
Press rt w e to select "MANUAL CH SET", then press
ENTER.
5
Add or skip the desired
channels.
To add channels
A Press rt to select "CH", then
press ENTER.
B Press the number buttons to
enter a channel number you
want to add, then press ENTER.
C Press rt to select "ADD/SKIP", then press ENTER.
D Press rt to select "ADD", then press ENTER.
E Repeat B – D to add other channels.
To skip channels
A Press rt to select "CH", then press ENTER.
B Press rt to select a channel number you want to skip, then
press ENTER.
C Press rt to select "ADD/SKIP", then press ENTER.
D Press rt to select "SKIP", then press ENTER.
E Repeat B – D to skip other channels.
6
Press SET UP to complete the setting.
DVD SET UP FUNCTION SET UP INITIAL SET UP
INITIAL SET UP / MANUAL CH SET
CH [CATV] 1
ADD/SKIP SKIP
ADD
RETURN
SKIP
SET UP OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
EXIT SELECT