JVC DR-MV5S Instructions Manual page 78

SUBSIDIARY SETTINGS
78
EN
Format A Disc (DVD Deck Only)
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
ATTENTION:
When a disc is formatted, all recordings and data are erased. It is
impossible to restore them.
Never turn off the unit or disconnect the AC power cord while
"NOW FORMATTING..." is displayed on the TV screen.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
Load a DVD-RAM/RW disc to format.
ENTER
Format A DVD-RAM Disc
1
2
3
4
then press t.
5
"FORMAT", then press ENTER.
Press w e to select "OK", then
press ENTER.
6
press ENTER.
Format A DVD-RW Disc
1
before continuing.
2
w e to choose "VR MODE" or "VIDEO MODE", then press ENTER
when "DISC WILL BE FORMATTED" appears on the TV screen.
"VR MODE": To be chosen when you want to record, erase, or edit
data on the disc repeatedly.
"VIDEO MODE": To be chosen when you want to erase all the data
on the disc once played back to record new data, or play back the
DVD disc on other DVD players.
3
NOTES:
It is impossible to format Version 1.0 DVD-RW discs in Video mode.
It is impossible to format DVD-R discs.
All the titles on a disc will be deleted once the disc is formatted even if
they are protected titles. (
rtwe
SET UP
Press DVD so that the DVD lamp lights up on the unit.
Press SET UP to access the Main Menu screen.
Press w e to select "DVD SET UP", then press t.
Press w e to select "UTILITY",
Press rt w e to select
Press w e to select "OK", then
Perform steps 1 to 4 of "Format A DVD-RAM Disc" as above
Press rt w e to select "FORMAT", then press ENTER. Press
Press w e to select "OK", then press ENTER.
pg. 64)
DVD SET UP FUNCTION SET UP INITIAL SET UP
LANGUAGE SET AUDIO OUTPUT UTILITY
FORMAT
FINALIZE
CANCEL DISC FINALIZATION
SET UP
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT