Digital Audio Dubbing - JVC DR-MV5S Instructions Manual

EDITING
44
EN

Digital Audio Dubbing

You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
Example: Dubbing to an MD
Recorder
Player
1
coaxial cable.
2
digital audio device.
3
4
wish to start dubbing.
5
6
7
8
9
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where you
intend editing to start, and where it actually starts.
Digital audio device
(MD deck, etc.)
Coaxial cable
(not supplied)
To [DIGITAL AUDIO
OUT (COAXIAL)]
Rear of unit
Connect the unit and a digital audio device using an optional
Place a disc on the unit and load an MD or CD on the connected
Select the audio to be dubbed.
Start playback slightly before the actual point from where you
Press 9 to pause playback.
Select the input mode on the connected digital audio device.
Press 4 to start playback on the unit.
Start recording on the digital audio device.
Stop recording on the digital audio device. Then press 8 to stop