Tuner Set - JVC HR-XV48E Instructions Manual

Filename [XV48EX_EN_10Subsidiary.fm]
XV48EX_EN_01.book Page 59 Saturday, October 9, 2004 10:34 PM

Tuner Set

IMPORTANT
Perform the following steps only if —
— Auto Channel Set has not been set correctly by Auto Set
Up or by Preset Download. (
— you have moved to a different area or if a new station
starts broadcasting in your area.
Your unit needs to memorize all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area to call
them up by using the PR buttons without going through any
vacant channels.
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch on the remote
control to the right.
Slide to the
right.
Auto Channel Set
A
Turn on the unit.
Press 1.
B
Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C
Access the Main Menu screen.
Press SET UP.
Page 59
pg. 10, 12)
D
Access the Auto Channel Set screen.
Press rt to move the
highlight bar (pointer) to
"AUTO CH SET", then press
ENTER or e.
E
Select your country.
Press rt to move the highlight bar (pointer) to your
country's name, then press ENTER or e.
F
Select the language.
Press rt to move the highlight bar (pointer) to the
language of your choice.
G
Perform Auto Channel Set.
Press ENTER twice.
When you have connected
the unit to a TV offering T-V
Link via a fully-wired 21-pin
SCART cable ( pg. 9), the
unit automatically performs
the Preset Download and the
T-V LINK screen will appear.
( pg. 12)
The Auto Set screen appears,
Beginning
and remains on screen while
the unit searches for
receivable stations.
As Auto Channel Set progresses, the "q" mark on the TV screen
moves from left to right. Wait until the TV screen as shown in
step H appears.
H
View the Confirmation screen.
After "SCAN COMPLETED" is
displayed on the TV screen for
about 5 seconds, the
Confirmation screen looking
like the one to the right
appears. The stations your unit
located appear on the
Confirmation screen —
channel positions (PR),
channels (CH) and station names (ID –
blueback screen and the programme currently being
broadcast by the blinking station appear alternately for 8
seconds each. To view the next page, use the rt w e
button on the remote control.
The stations located in the selected country appear at the top
of the list.
The Guide Program numbers will also be set automatically
during Auto Channel Set.
I
Return to the normal screen.
Press SET UP.
Masterpage:Right-No-Heading
59
EN
End
pg. 63). The
October 9, 2004 10:34 pm