Solving Problems - Uniden BW30xx Series Owner's Manual

If...
There is no picture from
the camera
The picture is dropping
There are audio problems
The picture has become
choppy
The monitor picture has
frozen
There is an irregular
beeping coming from the
monitor
26

soLVInG PRoBLeMs

Try...
• checking all connections to the camera. Make
sure the adaptor is plugged in.
• making sure that the cameras and monitor are
both ON.
• making sure that the camera is in range of the
monitor.
• moving the camera closer to the monitor.
• repositioning the camera, monitor or both to
improve the reception.
• adjusting the monitor and camera antennas to
vertical position.
• making sure that there is sound within range of the
camera microphone.
• moving the camera or monitor farther apart if the
unit emits a loud screeching noise (feedback).
The picture may become choppy when experiencing
a lower frame rate. Try:
• moving the camera closer to the monitor.
• removing obstructions between the monitor and
camera.
• adjusting the monitor and camera antennas to
vertical position.
Use a blunt object like an unbent paper clip to press
RESET and reset the monitor. The monitor turns off.
Press POWER to turn it back on again.
That is the Alert tone. Go to the Alert screen to turn
the alert volume down or off (see page 20).