Solving Problems - Uniden Guardian UBR243 User Manual

If you have problems with the system, there is often a quick and simple solution. Please try the
following:
If
There is no picture from the camera • checking all connections to the camera. Make sure the
The picture is dropping
There are audio problems
There is an irregular beeping
coming from the monitor
The picture has become choppy
The monitor picture has frozen

soLVING ProBLems

Try
adapter is plugged in.
• making sure that the cameras and monitor are both ON.
• making sure that the camera is in range of the monitor.
• moving the camera closer to the monitor.
• repositioning the camera, monitor or both to improve the
reception.
• adjusting the monitor and camera antennas to vertical
position.
• making sure that there is sound within range of the camera
microphone.
• moving the camera or monitor farther apart if the unit emits a
loud screeching noise (feedback).
That is the Alert tone. Go to the Alert screen to turn the alert
volume down or off (see page 24).
The picture may become choppy when experiencing a lower
frame rate. Try:
• moving the camera closer to the monitor.
• removing obstructions between the monitor and camera.
• adjusting the monitor and camera antennas to vertical
position.
Use a blunt object like an unbent paper clip to press
and reset the monitor. The monitor turns off. Press
turn it back on again.
RESET
to
POWER
41