Basic Operations - JVC 0397MKV*UN*VP Instructions Manual

50
Operating camcorder
PREPARE CAMCORDER
1
Set the camcorder's Power Dial to
"PLAY" and insert a recorded tape into
the camcorder.
2
PLAYBACK ON TV MONITOR
Click . The PLAY lamp lights in the
MODE display.
•Playback picture appears on the TV
monitor.
•To confirm other operations, click other
buttons.

BASIC OPERATIONS

Setting in/out points
PLAYBACK ON TV MONITOR
1
Click . Playback picture appears on the
TV monitor.
SET CUT IN/OUT POINTS
2
Select "Set Function" from "Edit" in the
Movie Player window and select "Edit
Tape".
To set CUT IN/OUT points, click IN/OUT
button at the beginning and end of the
scene you want to dub.
•Set CUT IN/OUT points so that the
CUT OUT point's value is larger than
the CUT IN point's.
•A scene with no CUT OUT point will
disable program playback and dubbing.
•If you set CUT IN point at the begin-
ning of the tape or if you set CUT OUT
point at the end of the tape, editing
may not function properly. Change
previously registered CUT IN/OUT
points slightly and try setting them
again.
•When connecting to a VHS-C
camcorder, rewind the tape to its
beginning and press COUNTER RESET
on the camcorder.
•The counters of DV-format digital
camcorders cannot be reset.
MOVIE PLAYER
File Edit Video Printer Help
Non Drop 00:20:35:16F
COUNTER
POWER
ON OFF
PROGRAM PLAYBACK
SCENE CUT IN
01 00:01:30:12F
02 00:07:15:21F
03 00:15:50:11F
ELAPSED TIME
ID 06 FILE
MEMO
SCENE START MODE
STILL
CUT OUT
PLAY
00:03:27:14F
00:10:40:18F
SEARCH
00:20:33:10F
SLOW
FF
REW
00:10:04:28F
IN/OUT