Changing The Name Of The Device; Two Same Type Devices - JVC 0397MKV*UN*VP Instructions Manual

Changing the name of the device

ACCESS "NAME CHANGE"
1
DIALOG BOX
Choose "Name Change" from "File" on
the MOVIE PLAYER window.
•The "Name Change" dialog box
appears.
SELECT DEVICE
2
Click on the name of the device and
"CHANGE".
•The dialog box to enter new name of
the device appears.
ENTER NEW NAME
3
SET NEW NAME
4
Click "OK".
•The message "Device name will be
changed." appears.
Clicking "OK" again sets that device
name and brings up the "Name
Change" dialog box.
RETURN TO MOVIE PLAYER
5
WINDOW
Click "CLOSE".
Name Change
Select the device to change.
VCR
06:VCRCAMERA
VIDEO PRINTER
Name Change
Enter new name (up to 20 letters).
=
06 VCRCAMERA (1)
OK
CHANGE CLOSE
CHANGE
CANCEL
Changing the device to use while
connecting over two same type
devices
ACCESS "DEVICE SELECTION"
1
DIALOG BOX
Choose "Device Change" from "File" on
the MOVIE PLAYER window.
•The "Device Selection" dialog box
appears.
SELECT DEVICE
2
Click on the name of the device and
"OK".
NOTE:
It is impossible to use two same type devices
simultaneously.
Device Selection
Select Devices to control.
VCR
DISCONNECT
06:VCRCAMERA (1)
07:VCRCAMERA (2)
VIDEO PRINTER
DISCONNECT
When Using the Video Capture Software
The JLIP Player Software and JLIP Video
Capture Software cannot run simultaneously.
When you want to run the JLIP Video
Capture Software, first select "Close Serial"
from "File" on the menu bar. To resume using
the JLIP Player Software, click the "JLIP"
button in the JLIP Video Capture Software
and select "Open Serial" from "File" on the
JLIP Player Software's menu bar.
63
OK
CANCEL