Video Capture; Capturing Video Images - JVC 0397MKV*UN*VP Instructions Manual

24

CAPTURING VIDEO IMAGES

There are three capture modes available: Step by Step, Program and Interval. The latter two
modes are available only when connected to a JLIP compatible video source unit. Step by Step
Capture mode must be used to capture images from a video source unit with no JLIP connector.
Image data flow
Video source
unit
When storing full image data on a 2HD disk,
• An image saved in the bitmap data format can be stored on one disk.
• About 28 images saved in the JPEG video compression format can be stored on one disk.
This is the case when using floppy disks formatted for 1.44 MB.
Video signal
Full image data
(with a resolution of 768 x 552
pixels)
2 types of video data
•Bitmap data Approx. 1.3MB
•JPEG video compression data
Approx. 50 kB
(video data are stored on a hard disk or the like)

VIDEO CAPTURE

GV-DS1
(Image stored in video memory)
PC
NOTES:
•The index image is displayed in the
image display box.
•Each time the image display box is
double-clicked, the full image data (768
x 552 pixels) is displayed only after full
image data transfer is finished.
Index image data
(with a resolution of
80 x 60 pixels)