Connections (When Using Jlip Player Software); Video Printer - JVC 0397MKV*UN*VP Instructions Manual

42

CONNECTIONS (When Using JLIP Player Software)

WHEN CONNECTING TO A VIDEO SOURCE UNIT WITH JLIP
CONNECTOR OR TO A VIDEO PRINTER
Be sure to turn off the power of all connected units before making any connections.
When connecting the provided cable, be sure to connect the plug with the Core Filter to the
Video Capture Docking Station.
When connected with the Video Printer
GV-PT2 Video
Printer
If you edit using a non-JVC VCR...
It is possible to use the remote control unit provided with the GR-DVM1.
Also refer to the GR-DVM1's instructions on connection and operation
with your brand of VCR.
NOTE:
Some VCR brands or models cannot be operated.
To COM port
(RS-232C)
PC
To JLIP connector
PC connection
cable (provided)
3.5 mm diameter
4-pole cable
(provided)
Connect this if
the video unit
has an S-Video
input connector
To S-Video input connector
To video input connector
RM-V708U or RM-V710U
To digital
connector
(8 pin)
Core
Filter
S-Video
cable
T W