Connecting A Dvd Player With A/V Connectors - Sony KF-60DX100 Service Manual

Connecting a DVD Player with A/V Connectors

DVD player
Use this hookup if:
Your DVD player does not have component (Y, P
If your DVD player has video component output connectors: for best
picture quality use the connection described on page 36.
Disconnect all power sources before making any connections.
1
Using audio cables, connect the DVD player's Audio OUT jacks to the
LCD projection TV's AUDIO IN jacks.
2
Using an S VIDEO cable, connect the DVD player's S VIDEO jack to
the LCD projection TV's S VIDEO jack.
YC-15V/30V
(not supplied)
S VIDEO
AUDIO-R (red)
AUDIO-L (white)
RK-74A (not supplied)
To take advantage of the Wide Screen modes, set the TV's aspect ratio to
16:9 on your DVD player. For details, refer to the operating instructions
supplied with your DVD player.
Use TV/VIDEO on the remote control to switch between the VCR, DVD
player and cable TV inputs.
If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
Installing and Connecting the LCD Projection TV
Rear of LCD projection TV
, P ) jacks.
B R
37