Sony KF-60DX100 Service Manual page 163

Installing and Connecting the LCD Projection TV
Cable and Antenna
Cable Box
Connections
26
If your cable provider does not feature local channels, you may find this set
up convenient.
CATV cable
(No connection to
TO CONVERTER)
Antenna cable
Select CABLE or antenna (ANT) mode by pressing
control.
To receive channels with an antenna, you need to turn your Cable to OFF
(see page 62) and perform the Auto Program function (see page 63).
Cable Box and Cable
This is the preferred basic cable TV hookup to use if:
Your cable TV company scrambles some channels, but not all of them
(pay channels vs. regular cable channels) and you need to use a cable
box, and
You want to enjoy the Twin View feature.
With this setup you can:
Use the LCD projection TV remote control to change channels using
your cable box when the signal is scrambled.
Use the LCD projection TV remote control to change channels using
your LCD projection TV when the signal is not scrambled. (Your LCD
projection TV's tuner provides a better signal than the cable box.)
Use the Twin View feature. (When all channels are routed through your
cable box, only one channel is sent to the LCD projection TV, so you
can not use the Twin View or Channel Index features for your cable
box.)
1
Connect the Cable TV cable to the LCD projection TV's VHF/UHF
jack.
2
Using a coaxial cable, connect the LCD projection TV's TO
CONVERTER jack to the cable box's IN jack. The LCD projection
TV's internal converter allows you to switch between unscrambled
signals coming straight into the LCD projection TV and scrambled
signals coming in through the cable box, eliminating the need for an
external splitter.
AUX
Rear of LCD projection TV
TO
CONVERTER
VHF/UHF
on the remote
ANT