Sony KF-60DX100 Service Manual page 42

3. Video Input Adjustment
1) Enter the Video color bar (100%) signal.
2) Set the adjustment conditions in 1. Preparation, and further
set the following data.
Adjustment conditions
Category
P-BOOST1 0
2103-1 22
23
2103-2 22
23
3) Press the [TWIN] button on the remote commander to display
color bar on the left and right two screens.
4) Measure the waveform, and repeat the SCOL and SHUE
adjustments so that VB1 = VB4, and VB2 = VB3.
Adjustment positions
Category
Left screen 2103-1
Right screen 2103-2
VB1 VB2 VB3
GND
5) After the adjustment finished, return the data set in 2) to
original values, and write the data by pressing the [MUTE] +
[ENTER] buttons on the remote commander.
Item Data
BSET 0
ATPD 0
DCTR 0
ATPD 0
DCTR 0
tem
3 SCOL
4 SHUE
3 SCOL
4 SHUE
VB4
4. Component Input Adjustment
1) Enter the Component 480i color bar (100%) signal.
2) Set the adjustment conditions in 1. Preparation, and further
set the following data.
Adjustment conditions
Category
P-BOOST1
2103-1
3) Measure the waveform, and repeat the SCOL and SHUE
adjustments so that VB1 = VB4, and VB2 = VB3.
Adjustment position
Category
MCP ADJ2
VB1 VB2 VB3
GND
4) After the adjustment finished, return the data set in 2) to
original values, and write the data by pressing the [MUTE] +
[ENTER] buttons on the remote commander.
5) Enter the Component 1080i color bar (100%) signal.
6) Set the adjustment conditions in 1. Preparation, and perform
adjustment in step 3).
7) After the adjustment finished, return the data set in 6) to
original values, and write the data by pressing the [MUTE] +
[ENTER] buttons on the remote commander.
8) Enter the Component 480p signal. Set same values as those
adjusted in 6) and write the data by pressing the [MUTE] +
[ENTER] buttons on the remote commander.
9) Enter the Component 720p signal. Set same values as those
adjusted in 6) and write the data by pressing the "[MUTE] +
[ENTER] buttons on the remote commander.
– 41 –
KF-60DX100
Item Data
0 BSET 0
22 ATPD 0
23 DCTR 0
Item
0 SCOL
1 SHUE
VB4
RM-Y910