Lancia Delta Owner's Handbook Manual page 30

– briefly press SET to go back to the submenu screen or
hold the button down to go back to the main menu screen
without storing the new settings;
– hold down SET to go back to the standard screen or
main menu, depending on which point in the menu you
have reached.
Unit of measurement (Set unit of measurement)
This function may be used to set the units of measurement
via three submenus: "Distances", "Fuel consumption" and
"Temperature". To set the required unit of measurement
proceed as follows:
– briefly press SET to display the three sub-menus;
Õ Ô
– press or to navigate the three sub-menus;
– once you have selected a sub-menu, press SET briefly;
GETTING TO KNOW YOUR CAR
- when accessing the "Distance" submenu: briefly press
SET: either "km" or "mi" will appear on the display (ac-
cording to the previous setting);
– press
– when accessing the "Fuel consumption" submenu:
briefly press SET: either "km/l ", "l/100km" or "mpg"
will appear on the display (according to the previous set-
ting);
If the set distance unit is "km", the display enables set-
ting of the fuel consumption unit (km/l or l/100) de-
pending on the amount of fuel consumed.
If the distance unit of measurement is set as"mi" the fuel
consumption unit of measurement will be displayed in
"mpg".
– press
– when accessing the "Temperature" submenu: briefly
press SET: either "°C" or "°F" will appear on the display
according to the previous setting;
– press
When you have made the required settings, briefly press
SET to go back to the sub-menu screen or hold the but-
ton down to go back to the main menu screen without stor-
ing the new settings.
– hold down SET to go back to the standard screen or
main menu, depending on which point in the menu you
have reached.
Õ Ô
or to change the setting;
Õ Ô
or to change the setting;
Õ Ô
or to change the setting;
29
1