196
REPLACING EXTERIOR BULBS
FRONT LIGHT CLUSTERS fig. 15
These contain the bulbs for the dipped beams, main beams
and direction indicators. The bulbs are arranged as fol-
lows:
A. Main beam headlights;
B. Dipped beam headlights;
C. Direction indicators.
fig. 15
IN AN EMERGENCY
DIPPED BEAM HEADLIGHTS
With incandescent bulbs
To change the bulb, proceed as follows:
❍ remove the protective cover B-fig. 15;
❍ release the bulb holder clip A-fig. 16;
❍ disconnect the electrical connector B;
❍ remove the bulb C and replace it;
❍ fit the new bulb, ensuring that the outline of the met-
al part coincides with the grooves on the curve of the
headlight. Then reconnect the electrical connector B
and reattach the bulb holding clip A;
❍ refit the protective cover A-fig. 15.
L0E0154m
fig. 16
L0E0155m