Changing A Bulb - Lancia Delta Owner's Handbook Manual

192
After tyre replacement
❍ stow the small spare wheel D-fig. 10 in the space pro-
vided in the luggage compartment;
❍ fit the partially-opened jack in its box, forcing it light-
ly to prevent it from vibrating when travelling;
❍ put the tools back into place in the container;
❍ stow the container, complete with tools, into the spare
wheel and tighten
fig. 10;
❍ put back the luggage compartment mat into the prop-
er position.
IMPORTANT Do not use an inner tube with tubeless tyres.
Periodically check the inflation pressure of the tyres and
small spare wheel.
IMPORTANT If you choose to install wheels of a different
type (with alloy rims instead of the steel ones or vice ver-
sa) you must change all the retaining bolts with others of
a suitable size and use a specific small spare wheel, with
different specifications.
It is advisable to keep the replaced bolts and small spare
wheel, as they are necessary if in future you decide to re-
install the original wheels.
IN AN EMERGENCY
the locking device B-

CHANGING A BULB

GENERAL INSTRUCTIONS
❍ Before changing a bulb check the contacts for oxida-
tion;
❍ blown bulbs must be replaced with others of the same
type and power;
❍ after replacing a headlight bulb, always check its align-
ment for safety reasons;
❍ when a bulb is not working, check that the corre-
sponding fuse is intact before replacing it: refer to the
"Replacing fuses" paragraph in this chapter for fuse
location.
Modifications or repairs to the electrical sys-
tem that are not carried out properly or do
not take the system's technical specifications
into account can cause malfunctions leading to the
risk of fire.