Advertisement
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Elimination of errors
Nothing, Battery-Symbol, [lo] or [88888]
[OUE2]
[EEEEE]
[LLLLL]
[UNST]
Change the batteries.
Recalibrate the scale as shown above.
You are overloading the scale. Remove the
excessive load immediately!
The delicate weighing load cells have
been damaged by misusing the scale
(i.e. it was shocked, dropped or
overloaded). You can try recalibrating the
scale. If the load cell has not been
damaged too much it will work
again after recalibration.
Use the scale in a more stable position
Advertisement
