Advertisement
times.
4. Place the required calibration weight for your scale
on the center of platform. Wait 3-4 seconds. The LCD
will display "PASS".
5. Remove the weight and press [ON/OFF] to turn off
the scale. Finished! Repeat if necessary.
IV. BLADE1000 Calibration Procedures
You will need a 1000g (1kg) calibration weight.
1. Turn on the scale by pressing [ON/OFF] key.
2. Wait until the LCD displays "0.0" then press and
HOLD the [MODE] key for 3 seconds. The LCD will
display "CAL". You can now release the [MODE] key.
3. Press [MODE] key again, the LCD will display "CAL"
and "1000.0".
4. Add 1000g calibration weight, the display will show
"PASS" and return to normal weighing mode.
5. Put away the calibration weight and press [ON/OFF]
to turn off the scale. Finished! Repeat if necessary.
V. TROUBLESHOOTING
Advertisement
