Warning Display - JVC BR-HD50 Instruction Manual

OTHERS
Warning display (continued)
Warning display (Displayed regardless of the DISPLAY mode)
When a warning display appears, BR-HD50 stops operation and ceases to accept any operation
command. When TAPE DEFECTIVE (5605 - 5609) is displayed, the unit similarly stops all opera-
tions except EJECT operation.
Display Status
WARNING 0201 Condensation.
CONDENSATION ON
DRUM
WARNING 3200 Unable to load tape.
LOADING FAILURE
WARNING 3300 Unable to eject tape.
UNLOADING FAILURE
WARNING 4100 Eject error.
CASSETTE EJECT
FAILURE
DEFECTIVE TAPE! Broken tape.
5605 - 5609
WARNING 5702 Tape-end sensor error.
TAPE END DET.
ERROR!
WARNING 5802 Tape-beginning sensor error.
TAPE BEGIN DET.
ERROR!
WARNING 7001 Drum rotation error.
DRUM MOTOR
FAILURE
WARNING 7101 Capstan rotation error.
CAP MOTOR FAILURE
WARNING 7202 - 7203 Supply reel rotation error.
SUPPLY REEL
FAILURE
WARNING 7302 - 7303 Take up reel rotation error.
TAKE UP REEL
FAILURE
WARNING 7305 Tape winding error during unloading.
TAKE UP REEL
FAILURE
WARNING 7401 Reel motor rotation error.
REEL MOTOR
FAILURE
Memo
This unit uses a microcomputer. It may not function correctly if there is external noise. If this happens,
please turn off the power and then on again.
E-80
Action
Leave the power on and wait for the
display to disappear.
This error can be resolved by turning
off and then on the power. However,
doing so may damage the tape in
some cases. Consult your JVC
authorized dealer.
Is a heavy object on the unit?
Press the EJECT button to remove
and replace the tape.
This error can be resolved by turning
off and then off the power. However,
doing so may damage the tape in
some cases. Consult your JVC
authorized dealer.
OTHERS
Troubleshooting
Symptom
No power. Is the AC adapter correctly connected?
Unable to record. Is the slide of the cassette tape turned to "REC"?
Set it to "REC" if it is at the "SAVE" position.
The operation buttons of BR-HD50 Is OPERATION LOCK of the SYSTEM [2/2] Menu set to ON?
do not work. Set it to OFF if the operation buttons are to be used.
For REMOTE, select the buttons that can be operated with the
LOCAL FUNCTION Menu.
Editing cannot be controlled even To control with RS-422A, set REMOTE SEL 9P in the REMOTE
after the REMOTE/LOCAL switch [1/2] Menu screen to "ON".
is set to REMOTE.
Noise is produced on the playback • The tape is damaged.
video. Replace the tape.
Playback sound interrupted. • The head is dirty.
Clean it with the specified head-cleaning tape. (XPage 9)
Cannot play back. Is the setting for PB TAPE FORMAT in the SYSTEM [2/2] Menu
screen something other than AUTO?
Playback is not available when this menu item does not match
the tape format.
Time codes are not correctly Is TC DUPLI.: DV in the TC/UB/CLOCK [1/2] Menu screen cor-
recorded during DV signal input. rectly set up?
Unable to turn on the power with Isn't the REMOTE/LOCAL switch set to REMOTE when
the OPERATE button. LOCAL FUNCTION in the REMOTE [1/2] Menu screen is not
set to ALL KEYS?
SERIAL REMOTE control does not Isn't REMOTE SEL SER in the REMOTE [1/2] Menu screen set
function. to OFF?
For SERIAL REMOTE control, set it to ON or LOC+REM.
Unable to operate BR-HD50 with • Isn't REM SEL HDV/DV in the REMOTE [1/2] Menu screen
the IEEE1394 terminal. set to OFF? To operate with the IEEE1394 terminal, set it to
ON or LOC+REM.
• When the controlling equipment (non-linear editor, etc.) does
not recognize this unit, either reconnect the IEEE1394
cable, or reset the power to the unit.
Action
E-81