Others - JVC BR-HD50 Instruction Manual

MENU SCREENS
Description of the Menu screens (continued)
DISPLAY Menu screen
Item Setting
DISPLAY OFF (00) For turning on/off on-screen status display on the monitor con-
(0600) EON (01) nected to the VIDEO OUT terminal.
AUTO (02) OFF
ON
AUTO
COUNTER ELOWER-R (00) For selecting the counter display position (CTL counter, time code
POSI. LOWER-L (01) and user's bit) of the monitor.
(0601) PPER-R (02) LOWER-R : Lower right
UPPER-L (03) LOWER-L : Lower left
CENTER (04) UPPER-R
UPPER-L
CENTER
TIME CODE OFF (00) For enabling/disabling the time code display on the monitor.
(0602) EON (01) OFF
ON
VTR MODE OFF (00) For enabling/disabling the VCR mode on the monitor.
(0603) EON (01) OFF
ON
TAPE REMAIN OFF (00) For enabling/disabling the display of the remaining time of the
(0604) EON (01) tape on the monitor.
OFF
ON
TIME/DATE OFF (00) For enabling/disabling the time/date display on the monitor and
(0605) TIME (01) selecting the display format.
DATE (02) OFF
EDATE+TM (03) TIME
DATE
DATE+TM : Date/Time display
A/V INFO. OFF (00) Select whether to display video/audio information on the monitor.
(0606) EON (01) OFF
ON
DATE STYLE YY/MM/DD (00) For selecting the date display format.
(0607) MM/DD/YY (01) YY/MM/DD : Year/Month/Day
DD/MM/YY (02) MM/DD/YY : Month/Day/Year (Set when shipping U model)
DD/MM/YY : Day/Month/Year (Set when shipping E model)
TIME STYLE 12HOUR (00) For selecting the display style of time.
(0608) E24HOUR (01) 12HOUR
24HOUR
PAGE BACK For returning to the TOP Menu screen.
E-78
Description
: No on-screen status display. Only video is displayed.
: Always shows on-screen status display.
: Shows on-screen status display for about 4 sec-
onds during mode changes.
: Upper right
: Upper left
: Center
: No display
: Display
: No display
: Display
: No display
: Display
: No display
: Time display only
: Date display only
: No display
: Display
: 12-hour mode
: 24-hour mode

OTHERS

Warning display
When an error occurs, BR-HD50 automatically self-diagnoses the cause and displays an error-coded
warning message on the monitor.
If BR-HD50 is not in good order, or if an operation error has occurred, an alarm display will be shown on
the monitor.
Warning display
D V 2 K C H – 1 / 2 3 S P 6 0 M I N
W A R N I N G 7 0 0 1
D R UM MO T O R F A I L U R E
S T A N D B Y - O F F
0 6 / 1 4 / 0 5
1 1 : 2 0 : 0 0 T C R 0 2 : 0 0 : 0 0 : 0 0
Alarm display (Displayed regardless of the DISPLAY mode)
Display
LOW VOLTAGE The DC power voltage is low.
BR-HD50 will eventually go into the OPERATE
OFF mode if operation is continued.
HEAD CLEANING The video head is dirty. (This message is dis-
REQUIRED! played when the DISPLAY mode is ON or
AUTO.) If the head is clogged, it will be
detected and the alarm message will be dis-
played in the PLAYBACK mode. The display
disappears when the cassette is ejected or the
head gets cleared of clog.
The message will also disappear when the
head cleaning tape is loaded.
OVER HEATING! The internal temperature of BR-HD50 has
exceeded the stated value.
UNPLUG MAIN This is a system error that occurs when the
POWER, PLUG power is turned on. The OPERATE indicator on
BACK IN AFTER A BR-HD50 blinks in green. The unit will not
WHILE accept any operation commands.
• For alarm displays resulting from operation errors, refer to page 24.
Alarm display
D V 2 K C H – 1 / 2 3 S P 6 0
H E A D C L E A N I N G R E Q U I R E D !
S T A N D B Y - O F F
0 6 / 1 0 / 0 5
1 1 : 2 0 : 0 0 T C R 0 2 : 0 0 : 0 0 : 0 0
Status Action
Check the power voltage.
Clean it with a JVC head-
cleaning tape. (XPage 9)
If the message
despite cleaning, it could be
due to bad recording condi-
tion, defective tape or head
lifespan.
Disconnect the power and
place BR-HD50 in a cool
place. If this message is dis-
played again, the unit may
have been damaged. In such
a case, consult your JVC
authorized dealer.
Unplug the power cord from
the power outlet and wait for
some time before plugging it
back in.
M I N
persists
E-79