Table of Contents
Advertisement
MENU SCREENS
Description of the Menu screens (continued)
SYSTEM Menu screens (continued)
Item
Setting
LONG PAUSE
E30SEC (00)
Select the time when BR-HD50 enters the TAPE PROTECTION
TIME
1MIN (01)
mode if the unit has stayed at still or stop for a prolonged period of
(0102)
2MIN (02)
time. The TAPE PROTECTION mode in at STILL can be selected
3MIN (03)
from LONG PAUSE MODE:
5MIN (04)
30SEC : 30 seconds
1MIN
2MIN
Memo
To prevent the video head from clogged or the tape from being
damaged, set as short a time as possible.
REC LONG
30SEC (00)
Select the time when BR-HD50 enters the TAPE PROTECTION
P.TIME
1MIN (01)
mode if the unit has stayed at recording pause for a prolonged
(0103)
2MIN (02)
period of time.
3MIN (03)
30SEC : 30 seconds
E5MIN (04)
1MIN
2MIN
Memo
To prevent the video head from clogged or the tape from being
damaged, set as short a time as possible.
LONG PAUSE
F.ADV (00)
For selecting the action when BR-HD50 stays at still for a long time.
MODE
ESTBY-OFF (01)
In the case of RECORDING PAUSE or STOP, it enters the
(0104)
STANDBY-OFF status:
F.ADV
STBY-OFF : Stops BR-HD50.
"Q,S" KEY
INDEX (00)
For selecting the function for the SEARCH+/S button and
FUNC.
SEARCH–/Q button.
EVAR/RECV
(0105)
(01)
INDEX
VAR/RECV : Changes the search speed during a search. (XPage 53)
REPEAT MODE
EOFF (00)
For enabling/disabling repeat playback and selecting the type of
(0106)
INDEX (01)
repeat playback.
V. END (02)
OFF
TAPE END (03)
INDEX
V. END
TAPE END : Repeat playback from the beginning to the end of
NEXT PAGE
For displaying the SYSTEM [2/2] Menu screen.
PAGE BACK
For returning to the TOP Menu screen.
E-68
Description
: 1 minute
3MIN
: 3 minutes
: 2 minutes
5MIN
: 5 minutes
: 1 minute
3MIN
: 3 minutes
: 2 minutes
5MIN
: 5 minutes
: Frame-advances BR-HD50 five times in the forward
direction. On the 6th attempt, this mode stops it.
: Performs index search. (XPage 54)
Enables adjusting analog audio input level. (XPage 44)
: No repeat playback
: Repeat playback between the positions where
index signals are recorded.
: Repeat playback from the beginning of the tape to
the position where video signal recording ends.
the tape.
SYSTEM [2/2] Menu
Item
Setting
DC IN MODE
EOPE OFF (00)
For selecting the action to perform when the power is supplied to
(0107)
OPE ON (01)
the DC IN terminal:
OPE OFF : Sets BR-HD50 to the OPERATE OFF mode.
OPE ON : Sets BR-HD50 to the OPERATE ON mode.
INDEX WRITE
OFF (00)
For enabling/disabling index signal recording.
(0108)
EON (01)
OFF : No index signal
ON : Select here to record index signals.
OPERATION
EOFF (00)
For enabling/disabling OPERATION LOCK.
LOCK
ON (01)
OFF : Turns off OPERATION LOCK and the operation buttons of
(0109)
ON : Turns on OPERATION LOCK. The operation buttons and
60/50 SEL
60 (00)
Sets HD video signal format to 60Hz or 50Hz.
(010A)
50 (01)
This menu item applies only to HDV format.
This must be set in the following situations.
• Set this menu item to match the input video signal format when
inputting HDV signals to the IEEE1394 terminal.
• Set this menu item to match the video format recorded on the
tape when playing a tape recorded with HDV signals.
60 : The HD signal format becomes 60Hz.
50 : The HD signal format becomes 50Hz.
[Settings upon shipping: U model: 60, E model: 50]
Memo
The unit restarts when this menu setting is changed.
The front panel 60 or 50 indicator is lit, according to this menu setting.
Recording and playback are unavailable when this menu setting dif-
fers from the HDV input signal or HDV recorded tape signal format.
During DV/analog signal input or when playing a tape recorded with DV/
analog signals, the field frequency format is fixed for the region, regard-
less of this menu setting. [U model: 60Hz (NTSC), E model: 50Hz (PAL)]
FACTORY SET
ECANCEL (00)
For enabling/disabling the factory setting for the Menu screens.
TING
EXECUTE (01)
CANCEL : Disable the factory setting
(010b)
EXECUTE: Enable the factory setting
Memo
The unit restarts when this menu setting is executed.
PB TAPE
EAUTO (00)
Selects whether to automatically detect playback tape video for-
FORMAT
DV (01)
mat, or to playback only a specific format.
(010c)
HDV (02)
AUTO
DVCAM (03)
DV
HDV
DVCAM : Plays back only video in DVCAM format.
Memo
When set to a specific format and a tape with a different format
is played back, there will be noise in the video.
If you play back a tape containing both DV and HDV formats,
the video signal is disturbed when the signal is switched.
DRUM HOUR
For displaying the time of drum usage.
METER
* The cursor cannot be brought to this item.
PAGE BACK
For returning to the SYSTEM [1/2] Menu screen.
Description
It records an index signal automatically at the position
where recording starts.
BR-HD50 can be used.
slide switches of BR-HD50 are disabled except the OPER-
ATE ON button and MENU operation. (XPage 36)
: Automatically detects and plays back all video formats.
: Plays back only video in DV format.
: Plays back only video in HDV format.
E-69
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
