Table of Contents
Advertisement
MAINTEN ANCE
Battery r emoval & installation
The battery is in the battery box below seat.
NOTE: Always keep ignition switch OFF when servicing
the battery.
3 3 3 3 3
1. When removing the battery for charging or replacement, dis-
connect the negative (-) terminal lead 3 from the battery
first, then disconnect the positive (+) terminal lead 4.
2. When installing the battery , connect the positive terminal
lead (+) first, then the negative terminal lead (-).
Fuses
When frequent fuse failures occur , it usually indicates a short
circuit or an overload in the electrical system.
NOTE: See your KYMCO dealer for electrical system
diagnosis and repair.
Fuse r eplacement
FUSE SIZE:
1. Open the fuse holder 5.
Pull the fuse holder clips
6 out of the holder.
2. Slide the fuse 7 out of
4 4 4 4 4
the holder clips.
3. Install a new fuse 8 of
the proper specification
into the holder clips.
4. Press the fuse and the
holder clips 6 back into
the holder.
5. Close the fuse holder 5
and set it back in place.
Never use a fuse with a different rating from that speci-
fied. Serious damage to the electrical system or a fire
hazard may result, causing a dangerous loss of lights
or engine power.
7A
(One MAIN fuse & one SPARE)
5 5 5 5 5
5 5 5 5 5
6 6 6 6 6
7 7 7 7 7
8 8 8 8 8
6 6 6 6 6
39
Hide quick links:
Advertisement
Table of Contents
