Lubricating The Pullmor Motor Armature Bearings - Lionel 3360 Burro Crane Owner's Manual

Lubricating the Pullmor motor armature bearings

Y
our Burro Crane will require the occasional lubrication of its Pullmor motor armature. If
you hear excess noise during operation, or if the unit slows down intermittently, you may
need to oil the armature bearings. We recommend that you purchase a Lionel Lubrication and
Maintenance Kit (6-62927) to properly service your Burro Crane.
1. Remove the two body screws from the cab. Refer to Figure 4 for the location of these
screws.
Figure 4. Screw locations
Body Screws
6
Front
Back