Operating The Cm707; Operating Modes; Temperature Enquiry/Adjustment; Time Adjusting - Honeywell CM707 User Manual

OPERATING THE CM707

Operating Modes

The thermostat can operate in three different modes: Automatic, Manual or Off. To
set the operating mode press either of the AUTO, MAN or OFF buttons. The screen
indicates which mode is currently active by displaying AUTO, MAN or OFF.
• AUTO (automatic) mode sets the thermostat to follow the built-in temperature
program (default or personalised). Operating the thermostat in this mode is the
best way to maintain a high level of temperature comfort whilst maximising your
energy savings.
• MAN (manual) mode sets the thermostat to act as a simple thermostat with
a fixed setpoint throughout the day. The setpoint can be adjusted from 5°C to
35°C by using the
temperature until another operating mode or temperature is selected.
• OFF mode sets the thermostat to control to a minimum temperature setting of 5°C
(default) that acts as a frost protection measure for your home.
Temperature Enquiry/Adjustment
• Temperature Enquiry
In AUTO, MAN and OFF operating modes the thermostat will display the
current room temperature. To review the programmed 'target' temperature
(the temperature which the thermostat is trying to maintain) press the
This 'target' temperature value will be displayed flashing for 5 seconds before
returning to the current room temperature value.
• Temperature Override
During normal operation (AUTO mode) the programmed temperature can be
adjusted manually by pressing the
temperature will be displayed and flash for 5 seconds - during this time the
buttons can be used to modify the set value. Note: This temperature override is
cancelled at the next programmed temperature change.
Time Adjustment
To adjust only the time during normal operation use the
the green button again to confirm any changes.
8
or buttons. The thermostat will continue to maintain this
or buttons or the button. The 'target'
or buttons and press
button.
or