Programming The Cm707; The Built-In Heating Program; Reviewing The Heating Program; Modifying The Heating Program - Honeywell CM707 User Manual

PROGRAMMING THE CM707

PROGRAMMING THE CM707
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be
set between 3.00am and 2.50am the following day - allowing you to maintain the
evening temperature after midnight. Each temperature level can be set between
5°C and 35°C, and adjusted in 0.5°C increments. The factory default program for
heating is as follows.
Monday to Friday
(Day 1 to 5)
Saturday & Sunday
(Day 6 & 7)
Reviewing the Heating Program
To review or edit the heating program use the PROGRAM
navigate between the 4 individual programming periods for that day. Use the DATE/
DAY button to step through each day of the week, so the complete 7 day heating
program can be reviewed or edited.

Modifying the Heating Program

To change the heating program:
a. Press either of the PROGRAM
buttons to enter the programming mode. The
time / temperature settings for period
Monday (Day 1) will be flashing as shown.
The active period is highlighted by a flashing
square around the numbers at the bottom of
the screen and the selected day is shown
with the day indicator.
b. To adjust the period start time use the
be displayed to confirm the change. Holding the button down will change the time
quickly.
Note: If you are pressing the
period, it means the next period will be pushed forward.
6
Period 1
Time 6:30
Temperature 20°C
Period 1
8:00
Time
20°C
Temperature
or
on
1
or buttons and the display flashes the next
2 3
8:00 18:00
16°C 20°C
2 3
10:00 16:00
18°C 20°C
1 2 3
1
or buttons, the 'OK?' indicator will
4
22:30
14°C
4
23:00
14°C
or buttons to
4 5 6 7
2 3 4