Cover Open Board and Harness Cover
1.
Remove:
■
Covers
on page 4-4
■
Left Cover
on page 4-5
■
Top Cover
on page 4-8
■
Laser (LSU) Assembly and Lower Cover
2.
Remove 1 screw securing the cover open housing harness cover.
3.
Release the latching tab and remove the cover open housing harness cover.
4.
Disconnect the connector from the main board.
5.
Using a small flatbladed screwdriver, release the 4 tabs to remove the cover open board.
Phaser® 3500 Laser Printer Service Manual
4-46
Repairs and Adjustments
on page 4-42
Cover Open PBA
Harness Cover
Cover Open
s3500-112