Xerox Phaser 3500 Service Manual page 25

Main Menu Sub Menu
L Motor
Ready
Fuser Fuser
Temp.
Read OPC
Cycle
Phaser® 3500 Laser Printer Service Manual
Description/Function
This tests if the laser unit is
ready and capable of
printing, or at a stable
polygon motor speed.
When the Target Temp is
displayed, INput the
temperature you would like
to set with the arrow buttons.
Press the OK button.
The target temperature and
the real temperature will be
displayed on the bottom line.
Default is T:190
Note: You can adjust the
temperature value while in
diagnostics, however, once
you exit the temperature will
return to the default.
The total rotating number of
the OPC drum is displayed
on the bottom line of the
control panel display when
the process is on.
2-9
Repair Analysis Procedures
Control Panel Display
Laser Ready Test
Pass/Fail
Target/Current
T: 190, C: XX
Total OPC-Cycle
XXXX