Yamaha XVS95CTB Owner's Manual page 55

2
1. Engine oil drain bolt
2. Gasket
TIP
Skip steps 4–6 if the oil filter cartridge is
not being replaced.
4. Remove the oil filter cartridge with
an oil filter wrench.
2
1
1. Oil filter wrench
2. Oil filter cartridge
PERIODIC MAINTENANCE AND ADJUSTMENT
TIP
An oil filter wrench is available at a
Yamaha dealer.
5. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
1
1. O-ring
TIP
Make sure that the O-ring is properly
seated.
6. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
1. Torque wrench
2. Oil filter cartridge
7. Install the engine oil drain bolt and
8. Refill with the specified amount of
7-12
1
2
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf, 31 ft·lbf)
the recommended engine oil, and
then install and tighten the oil filler
cap.
7