Jp22, Jp23: Celeron / Coppermine Select; 5Vsb And Vcc Leds - TMC MI7WBM SERIES User Manual

Chapter 4 Configuring the Motherboard

4.9 JP22, JP23: Celeron / Coppermine Select

The default setting of the JP22 and JP23 2-pin jumpers are SHORT,
which setting is used for Intel Coppermine and Intel Celeron CPUs.
However, for Intel Celeron processors with CPU ID 066X, JP22 and
JP23 should be left OPEN.
The JP22 and JP23 jumpers can be found only in MI7WBM Series
Ver. 1.20.

4.10 5VSB and VCC LEDs

The 5VSB LED light is on to indicate that there is suspend power signal
from the power supply . The VCC LED light is on to indicate the power is
on.
16 MI7WBM User's Manual