TMC MI7WBM SERIES User Manual page 62

Chapter 7 Intel 810 Drivers Installation
5. When Windows restarts, the Add New Hardware Wizard screen would
appear as Windows searches the driver for Intel® 82802 firmware Hub
Device. Click Next to "search for the best driver for the device". Click
Next again for Windows to start searching for the driver. The Insert
Disk screen will appear and prompt you to enter the path of the file
. The file is located in the
iFWH.cat
Windows directory. (You may click on
path.) When the correct path is entered and the files are copied, click
Finish .
6. At this stage, the Add New Hardware Wizard searches for the drivers
for Intel 82810 DC-100 System and Graphics Controller. Follow the
instructions on the screen to install the drivers.
7. After the drivers are installed, the wizard starts to find other hardware
available in the system. The wizard will also search for the drivers of
the Standard PCI Graphics Adapter (VGA). Follow the instructions on
the screen. When Windows prompts you to restart the computer, click
.
Yes
58
subdirectory under the
i810cat
to find the correct
Browse
MI7WBM User's Manual