TMC MI7WBM SERIES User Manual page 48

Chapter 6 BIOS Configuration
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1 3F8/IRQ4
Serial Port 2 2F8/IRQ3
Parallel Port 378H/IRQ7
UART Mode Select
This field determines the UART mode in your computer. The default
value is Normal. Other options include IrDA and ASKIR.
Onboard Parallel Port
The setting for this field are 378/IRQ7, 278/IRQ5, 2BC/IRA7 and
Disabled. By default, the onboard parallel port is set to 378/IRQ7.
Onboard Parallel Port
The setting for this field are 378/IRQ7, 278/IRQ5, 2BC/IRA7 and
Disabled. By default, the onboard parallel port is set to 378/IRQ7.
RxD, TxD Active
The settings for this field are Hi,Lo, Lo,Hi, Lo,Lo, and Hi,Hi.
IR Transmission Delay
By default, this field is set to Enabled.
UR2 Duplex Mode
The settings available for this field are Half (default) and Full.
Use IR Pins
The settings for this field are IR, Rx2Tx2 (default) and RxD2, TxD2.
PWRON After PW-Fail
In case of power failure, the system can be configured to power on or to
remain off when the power returns. These two settings are Former-Sts
and Off respectively. The default setting for this field is Off.
Game Port Address
The settings for this field are 201 (default), 209 and Disabled.
Midi Port Address
The option settings for this field are 330, 300, 290 and Disabled. The
default setting is 330.
Midi Port IRQ
The option settings for this field are 5 and 7. The default setting is 7.
44 MI7WBM User's Manual