Beltronics Express E926CS Operating Instructions Manual page 9

Digit #1 solid—sws
Digit #1 flashing—sws
®
Guard Alert—
When on, unit will detect signals from Interceptor vg-2
transmitters. Factory setting is off. Use of vg-2 Guard
recommended only in areas known to use the Interceptor vg-2.
Digit #2 solid—vg-2 Guard
Digit #2 flashing—vg-2 Guard
Safety Warning System
( 926
EXPRESS
When on, unit will provide Digital Voice announcement when
™
transmitters are detected. Factory setting is on. When
sws
off, Digital Voice is replaced by sws
Digit #3 solid—sws
Digit #3 flashing—sws
Digital Voice Prompts for Radar/Laser/sws
#3
IGIT
(D
When , unit will provide Digital Voice prompts followed by
"beeps" when X/K/Ka, Laser, VG-2 Guard
categories are detected. Factory setting is
voice prompts are replaced by separate "beeps only.
Digit #3 solid—Digital Voice Prompts
Digit #3 flashing—Digital Voice is
Note: Digital Voice messages for the Five sws
to what is written on the sws
Digital Voice Prompts for Radar/Laser/vg-2 Guard
( 926
EXPRESS
When on, unit will provide Digital Voice prompts followed by
"beeps" when X/K/Ka, Laser and vg-2 Guard
detected. Additionally,
™
categories only. Factory setting is on. When "off" ,
sws
Digital Voice prompts are replaced by "beeps" only.
Digit #4 solid—Digital Voice prompts
Digit #4 flashing—Digital Voice prompts
™ is
™ is
#
® with Digital Voice Messages—
)
ONLY
™ Digital Voice is
™ Digital Voice is
916
FOR EXPRESS
)
ONLY
EXPRESS
® is
® is
™
"tone/clicking" only.
vg-2 Guard
™
)
ONLY
® and the five sws
ON
("beeps" only)
™
catagories are not exact
™ message information.
916 will provide Digital Voice for
®
is
#
(sws ™ tone only)
®
™
. When , Digital
OFF
® Alert—
#
® signals are
("beeps" only)