Programming
Press and hold the BRT and SEN buttons to access Programming. To exit Programming, simply wait a few
seconds without pressing a button. The unit will display
Press BRT to go from
one category to the next
User Mode
Display Color
Speed Display
Cruise Alert
Over Speed
Meter Mode
Tones
AutoMute
AutoLock
Language
Voice
GPS Filter
Advanced*
Novice
Scan Bar*
Pilot
Full Word
Copper*/Blue/Green/Red
On*
Off
Off / 20-160 mph
20 mph*
Off / 20-160 mph
70 mph*
Standard*
Tech
Basic
Standard*
Mild
Low/Med*/High/Off
On* / Off
Units
English*/Metric
English*/Espanol
On* / Off
On* / Off
Completed
to confirm your selections.
Press VOLUME + or – to change
your setting within a category
Access and customize all Settings and Preferences
Access and customize units and display color, (all other
Settings are set to factory defaults)
NOTE: Switch back to Advance mode to view all Preferences
Scanning Bar with Full Word
Full Word: AutoScan, Auto NoX, or Highway
Set color to match your vehicle's dash display
Displays current speed
Displays battery voltage
Offers double beep alert tones below specified speed
Reminds you when you exceed a specified speed
Single band with front and rear signal strength bar graphs
Single band with numeric frequency and front and rear
signal strength bar graphs
Simple messages replace bands:
Caution
(if traveling below cruise alert limit)
Slow Down
(if traveling above cruise alert limit)
Standard Beltronics alert tones
Mild doorbell chime alert tones
Automatically reduces audio to preferred volume during alert
Automatically stores and locks out false alarms
Units for distance and speed
Language for voice and text
Voice announcements
Enables GPS-powered features
7
Need help?
Do you have a question about the GT-360 and is the answer not in the manual?
Questions and answers