Mighty Mule Installation Manual page 7

IMPORTANT SAFETY INSTRUCTIONS
III. After Installation
1. Attach the warning signs (included) to each side of the gate to alert the public of automatic gate operation. It is
your responsibility to post warning signs on both sides of your gate. If any of these signs or warning decals become
damaged, illegible or missing, replace them immediately. Contact GTO for replacements.
2. Do not allow children or pets near your gate. Never let children operate or play with gate controls. Keep the
remote controls away from children and unauthorized users; store controls where children and unauthorized users do
not have access to them.
3. KEEP GATES PROPERLY MAINTAINED. Clean the push-pull tube with a soft, dry cloth and apply silicone
spray to it at least once per month.
4. Test your gate opener monthly and service it regularly. The gate MUST stop and reverse on contact with a
obstruction or when an object activates the non-contact sensors. If these functions are observed to operate
improperly, discontinue use and contact the GTO Service Department immediately.
5. To operate this equipment safely, YOU must know how to disconnect the opener for manual gate operation
(see page 1). If you have read the instructions and still do not understand how to disconnect the opener, contact the
GTO Service Department.
6. Disconnect the opener ONLY when the control box power switch is OFF and the gate is NOT moving.
7. Distribute and discuss copies of the IMPORTANT SAFETY INSTRUCTIONS section of this manual with all
persons authorized to use your gate.
SAVE THESE INSTRUCTIONS
8. .
3