External Controls
Power switch
By rotating the knob as shown, you can
turn the power ON/OFF and operate the
illumination switch.
Focus / Zoom dial
When shooting with a focus / zoom gear:
Pull the focus / zoom dial out and rotate
it so that the convex part of the dial is
set in the deep groove on the spacer.
When shooting without a focus / Zoom gear
Pull the focus / zoom dial out and rotate
it so that the convex part of the dial is
set in the shallow groove on the spacer.
CAUTION
The focus / zoom dial cannot be used
if there is no gear mounted on the
lens.
When using a zoom gear, you cannot shoot with manual focus.
If you will be shooting autofocus shots with the focus gear mounted on the
lens, make sure to use the shallow groove. If you set it to the deep groove,
it could damage the lens.
Power switch
Spacer
Deep groove
Shallow groove
E-24